what you should notice when operate the jaw crusher ?
Source:Great Wall Heavy Industry Author:GreatWallPosted:2014-08-25 Views:
Only the correct operation of jaw crusher can makes if normal running,which can reduce the wear and tear of jaw crusher,and maximum extend the service life of the machine,Here, Great Wall Heavy Industry experts will tell you what you should notice when operate the jaw crusher.
1.Jaw crusher must be unloaded start, when the machine is running normally,then you can feed the material into it.The feeding specifications shall not be more than 0.85 times of feeding mouth size,and the material should be evenly feed into the crushing cavity.
2. Jaw crusher is suitable for crushing hard and medium hard ore,avoid crushing the material does not meet the requirements, so as not to cause unnecessary damage to the jaw crusher.
3. During normal operation, pay attention to prevent stones embedded in the tension spring,which can affect the spring strength. Pay attention to the bearing temperature should not be too high, otherwise you should immediately stop the machine.
4. In the process of jaw crusher operation, you should often check whether the lubrication of all lubricating points is normal,if you discover the fault,you should immediately stop,to find out the reasons and troubleshooting.
1.Jaw crusher must be unloaded start, when the machine is running normally,then you can feed the material into it.The feeding specifications shall not be more than 0.85 times of feeding mouth size,and the material should be evenly feed into the crushing cavity.
2. Jaw crusher is suitable for crushing hard and medium hard ore,avoid crushing the material does not meet the requirements, so as not to cause unnecessary damage to the jaw crusher.
3. During normal operation, pay attention to prevent stones embedded in the tension spring,which can affect the spring strength. Pay attention to the bearing temperature should not be too high, otherwise you should immediately stop the machine.
4. In the process of jaw crusher operation, you should often check whether the lubrication of all lubricating points is normal,if you discover the fault,you should immediately stop,to find out the reasons and troubleshooting.
- Previous: The daily check of jaw crusher
- Next: Jaw crusher is used for crushing stone