Diesel engine crusher with trouble and trouble shooting
Source:http://www.greatwallcrushers.c Author:GreatWallPosted:2015-05-26 Views:
Application and structure
Diesel hammer crusher can be used to crush all kinds of fragile minerals with compressive strength less than 100MPa, moisture content less than 15%, such as coal, gypsum, coke, slag, alums, bricks tiles, limestone, dolomite etc.
Trouble and trouble shooting
1. Trouble: Vibration increased
Cause: Rotor didn't keep balance when installing or exchanging the hammer.
Trouble shooting: Take off the hammers, choose hammer according to weight, make the total weight of the hammers on each hammer shaft equal to that of the counter shaft.
2. Trouble: Capacity Reduced
Cause: Cage bars are blocked Materials fed unevenly
Trouble shooting: Stop the machine and clean the jam.
Adjust the feeder.
3. Trouble: Bearing temperature is too high
Cause: Lubricating grease is not enough.
Lubricating grease is polluted.
Bearing is damaged.
Trouble shooting: Add lubricating grease.
Clean the bearings, exchange new grease.
Exchange bearings.
4. Trouble: Output size too big
Cause: Hammer is worn too much.
Cage bar break down.
Trouble shooting: Exchange hammer.
Exchange cage bars.
More information or problem, you can CONTRACT US. It is a pleasure if I can help you.
Other relevant products:jaw crusher,cone crusher, Raymond mill, Roller crusher
Diesel hammer crusher can be used to crush all kinds of fragile minerals with compressive strength less than 100MPa, moisture content less than 15%, such as coal, gypsum, coke, slag, alums, bricks tiles, limestone, dolomite etc.
Trouble and trouble shooting
1. Trouble: Vibration increased
Cause: Rotor didn't keep balance when installing or exchanging the hammer.
Trouble shooting: Take off the hammers, choose hammer according to weight, make the total weight of the hammers on each hammer shaft equal to that of the counter shaft.
2. Trouble: Capacity Reduced
Cause: Cage bars are blocked Materials fed unevenly
Trouble shooting: Stop the machine and clean the jam.
Adjust the feeder.
3. Trouble: Bearing temperature is too high
Cause: Lubricating grease is not enough.
Lubricating grease is polluted.
Bearing is damaged.
Trouble shooting: Add lubricating grease.
Clean the bearings, exchange new grease.
Exchange bearings.
4. Trouble: Output size too big
Cause: Hammer is worn too much.
Cage bar break down.
Trouble shooting: Exchange hammer.
Exchange cage bars.
More information or problem, you can CONTRACT US. It is a pleasure if I can help you.
Other relevant products:jaw crusher,cone crusher, Raymond mill, Roller crusher